The Dewalt DW715 for years was listed as the #1 best selling miter saw in its category on Amazon.com. This is no small feat considering the amount of miter saws listed on Amazon. But it is a testament to its quality and versatility too. The saw is really well designed, and has the power and durability to enable you to work of some heavy duty jobs, either at home or out on site.
Click here to see what others are saying about the DW715…
The Dewalt DW715 is powered by a 15 AMP motor that can deliver 4000 RPM. It is known for its precise cuts with the help of the adjustable steel miter plate on your woodwork. It is a good power tool to greatly increase your productivity and make your work smooth and easy. This miter saw is also packed with a lot of safety features to negate the possibility of injuring yourself when you are working on your job.
A closer look at the Dewalt DW715
The Dewalt DW715 weighs around 42 pounds and could easily be conveniently moved around with the help of the carry handle. The saw is fully assembled and you don’t have to worry about initial setup. It can also be perched on a strong table or workbench if you don’t find it comfortable handling a power saw placed on the ground. The foot of the machine has holes placed in the right positions to be anchored to a strong table.
The saw has been already configured for all the precise cuts in the factory. However, if there were any changes in the adjustments because of shipping, you could always readjust the miter sale, miter point, bevel pointer, bevel stops, etc. The hardened bevel stops are made for versatility with the most widely used angles (0, 33.9 and 45).
The tool has a good set of safety features since miter saws in general could be very dangerous to use with their sharp spinning blades. There is a blade guard present to cover the blade completely so that it gets in contact only with wood that is placed directly under it. As you lift the arm all the way to the top, the arm slips to provide further safety. The best safety feature of the saw is its interlocking trigger that prevents the machine from accidental startups.
It can take blade 12 inch blade with one inch Arbor holes. The stock blades have a speed rating of 4800 RPM. When the blades are worn, you should always use blades of the same specification for best performance and accurate cuts. The main functionality of the Dewalt DW715 is to make crosscuts and one is not advised to use a combination of ripping blade or any blade with an effective hook angle in excess of 7 degrees.
Removing and installing the blade
The blade that comes with this machine is pretty durable and could last for a really long time. For regular users, blade changing is not that hard when the blade has become blunt. Once the arm is raised to the upper position, the brackets can be loosened to access the blade screw. From there it is just a matter of loosening the blade screw to remove the worn out blade.
Installing new blades on the Dewalt DW715 is not much of a problem either. With the lower guard held and the arm raised, the blade could be easily placed on the spindle. The outer clamps are then assembled and the blade screws are fastened to secure the blade into place. The owner’s manual also has a step-by-step instruction with pictures to assist people who are new to using Dewalt saws.
Motor size and power
The Dewalt DW715’s 15 Amp motor has a maximum power output of 1600 watts that works with a power input of 120 volts. It might be hard to cut thick lumber with moisture content. The ample power produced from the motor makes it a chop saw for cutting think wood and could also be used for angled trim cuts with high precision, thanks the huge blade that spins at 4000 RPM.
Final thoughts on the Dewalt DW715
This model definitely has more automatic stops when compared to many of its competitors. There are totally 11 stops for general miter cutting needs and 4 for bevel cuts. The Dewalt DW715 is a very robust and versatile miter saw and can handle any type of cutting and trimming tasks thrown at it.